Brother MFC-9320CW - Page 374

5-159
Confidential
(4) Remove the Taptite bind B M3x10 screw, and then remove the Pick-up solenoid and
Pick-up solenoid lever from the Side frame L.
Fig. 5-203
(5) Remove the Pick-up solenoid lever from the Pick-up solenoid.
Fig. 5-204
Harness routing: Refer to “ PF Registration Solenoid, Pick-up Solenoid.”
Taptite bind B M3x10
Side frame L
Pick-up solenoid
Pick-up solenoid lever
Pick-up solenoid
Pick-up solenoid lever