7-5
Confidential
(4) When printing of the correction data is finished, the machine beeps for one second and
returns to the initial state of the maintenance mode.
■ For white and black scanning
Fig. 7-1
Note:
- If any data is abnormal, its code will be printed in inline style.
- Regarding the black and white level data after monochrome reading is done, only the G
data is printed, and R and B data are not printed.
- The white level data and black level data are imported in 10/16 bits, and the data in the
upper 8 bits are printed.
To Next Page
Loading...
