Scanning
159
8
Scanning a document using the ICA driver (Mac OS X 10.6.x) 8
You can scan a document using one of the following methods:
Using the Image Capture application
Scanning directly from the “Print & Fax” section
Using Image Capture 8
In order to use Image Capture included with Mac OS X 10.6.x, the ICA Scanner Driver is required. The
Brother CUPS Printer Driver for Mac OS X 10.6.x contains the ICA Scanner Driver. To use the ICA Scanner
Driver you must install the driver using the Custom Install from the CD-ROM.
a Connect your Brother machine to the Macintosh using a USB cable. Or connect your Brother machine
to the same LAN (if you are using a network model) or Wireless LAN where the Macintosh is connected.
b Launch the Image Capture application.
To Next Page
Loading...
