Brother MFC-9460CDN - Page 54

Chapter 7
48
Brightness 7
Adjust the copy brightness to make copies
darker or lighter.
To temporarily change the copy brightness
setting, follow the steps below:
a Make sure you are in Copy mode .
b Load your document.
c Use the dial pad to enter the number of
copies (up to 99).
d Press Options.
Press a or b to choose Brightness.
Press OK.
e Press c to make a lighter copy or press
d to make a darker copy.
Press OK.
Quality :Auto
Enlg/Red:100%
Tray :MP>T1
Bright :-nnonn+c
Select dc& OK
01
f Press Black Start or Color Start.
To change the default setting follow the steps
below:
a Press Menu, 3, 2.
32.Brightness
-nnonn+
Select dc&OK
b Press c to make a lighter copy or press
d to make a darker copy.
Press OK.
c Press Stop/Exit.
Color Adjust (Saturation) 7
You can change the default setting for color
saturation.
To change the default setting follow the steps
below:
a Press Menu, 3, 4.
34.Color Adjust
a 1.Red
2.Green
b 3.Blue
Select ab or OK
b Press a or b to choose 1.Red,
2.Green, or 3.Blue.
Press OK.
c Press d or c to increase or decrease the
color saturation.
Press OK.
d Return to step b to choose the next
color. Or press Stop/Exit.