Brother MFC-9460CDN Network User's Guide

Configuring your machine for a wireless network (For MFC-9560CDW)
14
3
Configuration temporarily using a USB or network cable 3
You can temporarily use a USB cable or network cable when you configure your Brother machine in this
method.
 You can remotely configure the machine from a computer that is also on the network using a USB cable
(A)
1
.
1
You can configure the wireless settings of the machine using a USB cable temporarily connected to a wired or wireless computer.
 If there is an Ethernet Hub or Router on the same network as the WLAN access point (A), you can
temporarily connect the Hub or Router to the machine using a network cable (B). You can then remotely
configure the machine from a computer on the network.
A
B
A

Brother MFC-9460CDN Specifications

General

Type	all in one
Color	black
Automatic Document Feeder Capacity	35 sheets
Paper Size	plain paper, thin paper, thick paper, thicker paper, recycled paper, bond, label, envelope, thin envelope, thick envelope, glossy paper
Paper Handling	up to 300 sheets
Color Print Speed	25 pages per minute
Mono Print Speed	25 pages per minute
Print Resolution Mono	up to 2400 x 600
Print Resolution Color	up to 2400 x 600
Maximum Number of Pages Per Month	up to 40, 000
Scan Resolution	up to 1200 x 2400
Copier Resolution Mono	up to 2400 x 600
Number Of Cartridges	4
Internal Memory	yes
Memory Card	no
Network	wired
Connectivity	usb 2.0
OS Compatibility	none
Mobile Devices Connection	yes

Weight and Dimensions

Height	19.4 inches
Width	19.8 inches
Net Weight	58.4 pounds