Home > Security > Lock the Machine Settings from the Control Panel > About Using Memory
Security > Change the Memory Security Password
Change the Memory Security Password
Related Models: MFC-J1170DW
1. Press [Settings] > [All Settings] > [Fax] > [Miscellaneous] > [Memory Security] >
[Set Password].
2. Enter the registered four-digit number for the current password using the touchscreen. Press [OK].
3. Enter a four-digit number for a new password using the touchscreen. Press [OK].
4. When the touchscreen displays [Verify], re-enter the new password using the touchscreen. Press [OK].
5. Press
.
Related Information
• About Using Memory Security
322
To Next Page
Loading...
