Brother MFC-J1300DW - Page 612

Home > Machine Settings > Change Machine Settings from the Control Panel > Settings and Features
Tables > Settings Tables (2.7"(67.5 mm) Touchscreen models)
Settings Tables (2.7"(67.5 mm) Touchscreen models)
These tables will help you understand your machine's menu selections and options.
>> [Settings]
>> [General Setup]
>> [Shortcut Settings]
>> [Fax]
>> [Network]
>> [Print Reports]
>> [Machine Info.]
>> [Initial Setup]
[Settings]
[Settings]
Level 1
Level 2 Level 3 Descriptions
(Date & Time)
Date
- (MFC models)
Add the date and time on the screen and in the
headings of the faxes you send.
(DCP models)
Set the date and time on your machine.
Time
-
Clock Type
- Select the time format (12-hour or 24-hour).
Auto Daylight
(MFC models)
(Available only for some
countries.)
- Set the machine to change automatically for
Daylight Saving Time.
Daylight Save
(Available only for some
countries.)
(MFC models)
- Change for Daylight Saving Time manually.
Time Zone
- Set your time zone.
Maintenance Improve Print
Quality
- Check and correct the print quality, alignment and
paper feeding according to the LCD instructions.
Print Head Cleaning
- Clean the print head according to the LCD
instructions.
Ink Volume
- Check the available ink volume.
Ink Cartridge Model
- Check your ink cartridge numbers.
Print Setting
Options
Reduce
Smudging
Reduce smudging on the paper or paper jams
during printing.
Slow Drying
Paper
Use this setting when printing with a type of plain
paper on which the ink dries very slowly.
Wi-Fi TCP/IP
- Set TCP/IP protocol.
Setup Wizard
- Configure your wireless network settings manually.
WLAN Assistant
- Configure your wireless network settings using the
Brother installation disc.
WPS
- Configure your wireless network settings using the
one-button push method.
605