Brother MFC-J200 - Machine Information; Checking the Serial Number; Checking the Firmware Version; Reset Functions

Troubleshooting
95
B
Machine Information B
Checking the serial number B
You can see the machine’s serial number on
the LCD.
a Press Menu, 7, 1.
Your machine’s serial number will
appear on the LCD.
b Press Stop/Exit.
Checking the firmware
version B
You can see the machine’s firmware version
on the LCD.
a Press Menu, 7, 2.
Your machine’s firmware version will
appear on the LCD.
b Press Stop/Exit.
Reset functions B
The following reset functions are available:
1 Machine Reset
You can reset the machine’s settings,
such as the Date and Time and Ring
Delay.
2 Network
You can reset the print server back to its
factory settings, such as the password
and IP address information.
3 Address&Fax
Address & Fax resets the following
settings:
 Speed Dial
(Speed-Dial and Setup Groups)
 Station ID
(Name and Number)
 Report settings
(Transmission Verification Report,
Speed Dial and Fax Journal)
4 All Settings
You can restore all settings to the factory
default.
Brother strongly recommends performing
this procedure before handing over or
disposing of the machine.
How to reset the machine B
a Press Menu, 0, 6.
b Press a or b to choose the reset function
you want.
Press OK.
c Press 1 to reset the machine or press 2
to exit from the reset function.
d Press 1 to reboot the machine.