Brother MFC-J2330DW Online User's Guide

Home > Fax > Receive a Fax > Receive Mode Settings > Choose the Correct Receive Mode
Choose the Correct Receive Mode
The factory setting of Receive Mode is “Fax Auto”. Your machine will automatically receive any faxes that are
sent to it. There are four Receive Modes of this machine as below.
Operation Display
Factory Setting Ring Delay
Fax Auto
Ring Delay: four times
Fax detection: On
Fax/Tel
Ring Delay: four times
External TAD
Fax Manual
>> MFC-J2330DW
>> MFC-J2730DW
MFC-J2330DW
1. Press
[Settings] > [All Settings] > [Fax] > [Setup Receive] > [Receive Mode].
2. Press a or b to display the [Fax Auto], [Fax/Tel], [External TAD], or [Manual] option, and then
press the option you want.
3. Press
.
MFC-J2730DW
1. Press [Settings] > [All Settings] > [Fax] > [Setup Receive] > [Receive Mode].
2. Press the [Fax Auto], [Fax/Tel], [External TAD] or [Fax Manual] option.
3. Press
.
Related Information
• Receive Mode Settings
• Remote Retrieval Commands
• Connect an External TAD
• Telephone and Fax problems
296

Brother MFC-J2330DW Specifications

General

Print Technology	Inkjet
Functions	Print, Copy, Scan, Fax
Connectivity	USB, Ethernet, Wi-Fi, Wi-Fi Direct
Scan Resolution	1200 x 2400 dpi
Fax Speed	33.6 kbps
Max Print Resolution	4800 x 1200 dpi
Print Speed (Black)	22 ppm
Print Speed (Color)	20 ppm
Duplex Printing	Automatic
Display	2.7" Touchscreen
ADF Capacity	50 sheets
Supported Paper Sizes	A3, A4
Operating System Support	Windows, macOS, Linux
Scanner Type	Flatbed, ADF
Mobile Printing	Brother iPrint&Scan, AirPrint, Google Cloud Print
Ink Cartridges	Black, Cyan, Magenta, Yellow
Paper Input Capacity	250 sheets