Brother MFC-J245 - Changing the Fax Resolution

Chapter 3
8
Changing the fax resolution 3
The quality of a fax can be improved by
changing the fax resolution. Resolution can
be changed for the next fax or for all faxes.
To change the fax resolution for the
next fax
3
a Load your document.
b Press (FAX).
c Press Fax Resolution then a or b to
choose the resolution.
Press OK.
d Enter the fax number.
e Press Black Start or Color Start.
To change the default fax resolution 3
a Load your document.
b Press (FAX).
c Press Menu, 3, 2, 1.
d Press a or b to choose the resolution
you want.
Press OK.
e Press 2 so you can continue sending
your fax.
f Enter the fax number.
g Press Black Start or Color Start.
NOTE
You can choose four different resolution
settings for black & white faxes and two for
color faxes.
If you choose S.Fine or Photo and then
use the Color Start key to send a fax, the
machine will send the fax using the Fine
setting.
Black & White
Standard Suitable for most typed
documents.
Fine Good for small print and
transmits a little slower than
Standard resolution.
S.Fine Good for small print or artwork
and transmits slower than
Fine resolution.
Photo Use when the document has
varying shades of gray or is a
photograph. Photo has the
slowest transmission.
Color
Standard Suitable for most typed
documents.
Fine Use when the document is a
photograph. Transmits a little
slower than Standard
resolution.