EasyManua.ls Logo

Brother MFC-J245 - Cleaning the Paper Feed Rollers

Brother MFC-J245
47 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Routine maintenance
31
A
Cleaning the paper feed
rollers A
If the paper feed rollers are stained with ink, it
may cause paper feed problems.
a Unplug the machine from the AC power
outlet. Pull the paper tray (1) completely
out of the machine.
NOTE
If the paper support flap is open, close it,
and then close the paper support.
b Clean the Paper Feed Rollers (1) with a
soft lint-free cloth moistened with water,
using a side-to-side motion.
After cleaning, wipe the rollers with a
dry, soft lint-free cloth to remove all
moisture.
c Put the paper tray firmly back in the
machine.
d Re-connect the power cord.
NOTE
Do not use the machine again until the
rollers are dry. Using the machine before
the rollers are dry may cause paper feed
problems.
1
1

Table of Contents

Other manuals for Brother MFC-J245

Related product manuals