Routine maintenance
33
A
Checking the ink volume A
You can check the ink that is left in the
cartridge.
a Press Menu, 1, 3.
b The LCD displays the ink volume.
c Press a or b to choose the color you
want to check.
d Press Stop/Exit.
You can check the ink volume from your
computer.
For more information, see Software and
Network User’s Guide: Monitor the Ink
Level and Status of the Machine from
Your Computer (Windows
®
) or Monitor
the Ink Level and Status of the Machine
from Your Computer (Macintosh).
Packing and shipping
the machine
A
When you transport the machine, use the
packing materials that came with your
machine. If you do not pack the machine
correctly, any damage that may occur in
transit may not be covered by your warranty.
The machine should be adequately insured
with the carrier.
It is important to allow the machine to
“park” the print head after a print job.
Listen carefully to the machine before
unplugging it to make sure that all
mechanical noises have stopped. Not
allowing the machine to finish this parking
process may lead to print problems and
possible damage to the print head.
a Unplug the machine from the AC power
outlet.
b Place both hands under the plastic tabs
on both sides of the machine to lift the
scanner cover into the open position.
Then unplug the machine from the
telephone wall jack and take the
telephone line cord out of the machine.
c Unplug the interface cable from the
machine, if it is connected.
To Next Page
Loading...
