Brother MFC-J245 - Adjusting Density; Remove Background Color

Chapter 7
28
g After the machine scans the page on the
scanner glass, press 1 to scan the next
page.
h Place the next page on the scanner
glass. Press OK to scan the page.
Repeat steps g and h until all the
pages have been scanned.
i Press 2 to finish scanning.
The machine starts printing.
NOTE
Fit to Page and Page Layout are
not available with Sort.
Adjusting Density 7
You can adjust the copy density to make
copies darker or lighter.
a Load your document.
b Press (COPY).
c Enter the number of copies you want.
d Press Copy Options and a or b to
choose Density.
Press OK.
e Press a or b to make a lighter or darker
copy.
Press OK.
f If you do not want to change any other
settings, press Black Start or
Color Start.
Remove Background Color 7
Removes a document's light background
colors when copying. This may make the
copy more readable and will save some ink.
NOTE
This function is for use only when making
color copies. The background color is
automatically removed for all black &
white copies.
a Load your document.
b Press (COPY).
c Enter the number of copies you want.
d Press Copy Options and a or b to
choose Remove Bkg. Clr.
Press OK.
e Press a or b to choose Low, Medium,
High or Off.
Press OK.
f Press Color Start.
NOTE
Fit to Page and Page Layout are
not available with Remove Bkg. Clr.