Brother MFC-J245 - Unscannable Area

Making copies
25
7
Enlarging or reducing copies 7
You can choose an enlargement or reduction
ratio. If you choose Fit to Page, your
machine will adjust to the size you set in
Paper Size.
a Load your document.
b Press (COPY).
c Enter the number of copies you want.
d Press Copy Options and a or b to
choose Enlarge/Reduce.
Press OK.
e Press a or b to choose the enlargement
or reduction ratio you want.
Press OK.
NOTE
If you chose Custom(25-400%) , enter
an enlargement or reduction ratio from
25% to 400%.
f If you do not want to change additional
settings, press Black Start or
Color Start.
NOTE
• Page Layout is not available with
Enlarge/Reduce.
• Page Layout, Sort and
Remove Bkg. Clr are not available with
Fit to Page.
• Fit to Page does not work correctly
when the document on the scanner glass
is skewed by more than 3 degrees. Using
the document guidelines on the left and
top, place your document in the upper-left
corner, with the document face down on
the scanner glass.
• Fit to Page is not available when
using the ADF.
• Fit to Page is not available for Legal
sized documents.
Making N in 1 copies or a
poster (Page Layout) 7
The N in 1 copy feature can help you save
paper by letting you copy two or four pages
onto one printed page.
You can also produce a poster. When you
use the poster feature, your machine divides
your document into sections, then enlarges
the sections so you can assemble them into a
poster. If you want to print a poster, use the
scanner glass.
NOTE
Sort, Enlarge/Reduce and
Remove Bkg. Clr are not available with
Page Layout.
a Load your document.
b Press (COPY).
c Enter the number of copies you want.
1
1
You can only make one copy at a time when
you are using Poster layout.
198% 4"x6" iA4
186% 4"x6" iLTR
104% EXE iLTR
100%
97% LTR iA4
93% A4 iLTR
85% LTR iEXE
83% LGL iA4
78% LGL iLTR
46% LTR i4"x6"
Fit to Page
Custom(25-400%)