Brother MFC-J245 - Sending Faxes; How to Send a Fax

Chapter 7
26
d Press Copy Options and a or b to
choose Page Layout.
Press OK.
e Press a or b to choose Off(1in1),
2in1(P), 2in1(L), 4in1(P),
4in1(L), Poster(3x3) or
2in1(ID)
1
.
Press OK.
1
For information about 2 in 1 (ID), see 2 in 1 ID
copy (Page Layout) on page 27.
f If you do not want to change additional
settings, press Black Start or
Color Start to scan the page.
If you placed the document in the ADF
or are making a poster, the machine
scans the pages and starts printing.
If you are using the scanner glass, go
to step g.
g After the machine has scanned the
page, press 1 to scan the next page.
h Place the next page on the scanner
glass. Press OK to scan the page.
Repeat steps g and h for each page of
the layout.
i After all the pages have been scanned,
press 2 to finish.
NOTE
• Make sure the paper size is set to
Letter, A4 or Executive.
• Poster copy is not available for Executive
size paper.
• You can only make one color copy at a
time.
• You can only make one Poster copy at a
time.
• Poster copy is not available when using
transparencies.
• (P) means Portrait and (L) means
Landscape.
Place the document face down in the
direction shown below:
 2in1(P)
 2in1(L)
 4in1(P)
 4in1(L)
 Poster(3x3)
NOTE
The poster copies have overlapping
portions so that you can easily paste them
together.