Brother MFC-J4335DW

Home > Machine Settings > Change Machine Settings from the Control Panel > General Settings > Change
for Daylight Saving Time Automatically
Change for Daylight Saving Time Automatically
You can program the machine to change automatically for Daylight Saving Time.
It will reset itself forward one hour in the spring, and backward one hour in the fall. Make sure you have set the
correct date and time in the [Date & Time] setting.
This feature is available only in the USA and Canada.
>> MFC-J4335DW/MFC-J4345DW
>> MFC-J4535DW
MFC-J4335DW/MFC-J4345DW
1. Press Settings.
2. Press a or b to make your selections:
a. Select [Initial Setup]. Press OK.
b. Select [Date & Time]. Press OK.
c. Select [Auto Daylight]. Press OK.
d. Select [On] or [Off]. Press OK.
3. Press Stop/Exit.
MFC-J4535DW
1. Press [Settings].
2. Press
[Date & Time] > [Auto Daylight].
3. Press [On] or [Off].
4. Press .
Related Information
• General Settings
561