EasyManuals Logo

Brother MFC-J435W Advanced User's Guide

Brother MFC-J435W
47 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #16 background imageLoading...
Page #16 background image
Chapter 3
12
Note
If you did not use up any of the numbers
for Groups, you can broadcast faxes to as
many as 90 different numbers.
The machine’s available memory will vary
depending on the types of jobs in the
memory and the number of locations used
for broadcasting. If you broadcast to the
maximum number available, you will not
be able to use dual access.
If the Out of Memory message
appears, press Stop/Exit to stop the job.
If more than one page has been scanned,
press Black Start to send the portion that
is in the machine’s memory.
Canceling a broadcast in progress 3
a Press Menu.
b Press a or b to choose Fax.
Press OK.
c Press a or b to choose
Remaining Jobs.
Press OK.
The LCD will show the fax number being
dialed and the Broadcasting job
number.
d Press OK.
The LCD will ask you the following
question:
Cancel Job?
Yes i Press 1
No i Press 2
e Press 1 to cancel the fax number being
dialed.
The LCD will then show the
Broadcasting job number.
f Press OK.
The LCD will ask you the following
question:
Cancel Job?
Yes i Press 1
No i Press 2
g To cancel the broadcast, press 1.
h Press Stop/Exit.
Real Time Transmission 3
When you are sending a fax, the machine will
scan the document into the memory before
sending it. Then, as soon as the telephone
line is free, the machine will start dialing and
sending.
Sometimes, you may want to send an
important document immediately, without
waiting for memory transmission. You can do
this by turning on Real Time TX.
a Press (FAX).
b Load your document.
c Press a or b to choose
Advanced Settings.
Press OK.
d Press a or b to choose Real Time TX.
Press OK.
e Press a or b to choose On (or Off).
Press OK.
f Press Clear so you can continue
sending your fax.
Note
If you are sending a color fax or if the
memory is full and you are sending a black
& white fax from the ADF, the machine will
send the document in real time (even if
Real Time TX is set to Off).
In Real Time Transmission, the automatic
redial feature does not work when you are
using the scanner glass.

Table of Contents

Other manuals for Brother MFC-J435W

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Brother MFC-J435W and is the answer not in the manual?

Brother MFC-J435W Specifications

General IconGeneral
Print TechnologyInkjet
Max Scan Resolution1200 x 2400 dpi
Fax Modem Speed14.4 Kbps
Paper Input Capacity100 sheets
Automatic Document FeederYes, 20 sheets
Duplex PrintingManual
Output Paper Capacity50 sheets
Memory64 MB
Max Print Resolution6000 x 1200 dpi
Max Print Speed (Black)33 ppm
Scanner TypeFlatbed
Copy Speed (Color)20 cpm
ConnectivityWireless 802.11b/g
Display1.9" LCD
Mobile PrintingBrother iPrint&Scan

Related product manuals