Home > Fax > Telephone Services and External Devices > Caller ID > Set up Your Area Code
Set up Your Area Code
When returning calls from the Caller ID history, your machine will dial "1" plus the area code. If your local dialing
plan requires that the "1" not be used for calls within your area code, enter your area code in this setting.
This feature is available only in the USA.
Calls returned from the Caller ID history to numbers within your area code will be dialed using only 10 digits
(area code + seven-digit number). If your dialing plan does not follow the standard 1 + area code + seven-digit
number dialing system for calling outside your area code, you may experience problems returning calls from the
Caller ID history and will not be able to return calls to those numbers using Caller ID history.
>> MFC-J491DW/MFC-J497DW
>> MFC-J690DW/MFC-J895DW
MFC-J491DW/MFC-J497DW
1. Press Settings.
2. Press a or b to select the following:
a. Select [Fax]. Press OK.
b. Select [Miscellaneous]. Press OK.
c. Select [Area Code]. Press OK.
3. Enter your Area Code (three-digit number), and press OK.
4. Press Stop/Exit.
MFC-J690DW/MFC-J895DW
1. Press
[Settings] > [All Settings] > [Fax] > [Miscellaneous] > [Area Code].
2. Enter your Area Code (three-digit number), and press [OK].
3. Press .
Related Information
• Caller ID
269
To Next Page
Loading...
Need help?
General
Weight and Dimensions
