Home > Network > Technical Information for Advanced Users > Reset the Network Settings to Factory
Default
Reset the Network Settings to Factory Default
You can use your machine's control panel to reset the print server to its default factory settings. This resets all
information, such as the password and IP address.
• This feature restores all wired (supported models only) and wireless network settings to the factory
settings.
• You can also reset the print server to its factory settings using BRAdmin Light, BRAdmin Professional 3,
or Web Based Management.
>> MFC-J5330DW
>> MFC-J5830DW/MFC-J5930DW
MFC-J5330DW
1. Press [Settings] > [All Settings] > [Network] > [Network Reset].
2. The message confirming reset will be displayed. Press [OK] for two seconds.
The machine will restart.
MFC-J5830DW/MFC-J5930DW
1. Press [Settings] > [All Settings] > [Network] > [Network Reset].
2. The message confirming reset will be displayed. Press [OK] for two seconds.
The machine will restart.
Related Information
• Technical Information for Advanced Users
• Transfer Your Faxes or Fax Journal Report
473
To Next Page
Loading...
Need help?
General
