Home > Security > Secure Function Lock 3.0 > Register a new ID Card Using Machine's Control Panel
Register a new ID Card Using Machine's Control Panel
Related Models: MFC-J5930DW
1. Touch the NFC symbol on the machine's control panel with a registered ID Card.
2. Press displayed at the top left of the screen.
3. Press [Register Card].
4. Touch a new ID Card to the NFC symbol.
The new ID Card's number is registered to the machine.
For the supported ID Card types, go to the Brother Solutions Center at support.brother.com to see FAQs &
Troubleshooting.
5. Press [OK].
Related Information
• Secure Function Lock 3.0
485
To Next Page
Loading...
Need help?
General
