5. Using both hands, gently adjust the MP tray paper guides to fit the paper.
• DO NOT press the paper guides too tightly against the paper. Doing this may cause the paper to fold
and jam.
• Place the paper in the center of the MP tray between the paper guides. If the paper is not centered, pull
it out and insert it again at the center position.
6. Do one of the following:
• When using Letter or A4 size, or smaller size paper
Pull out the paper support until it locks into place.
• When using paper larger than Letter or A4 size, or envelopes
Pull out the paper support (1) until it locks into place, and then unfold the paper support flap (2).
7. Change the paper size setting in the machine's menu, if needed.
Make sure printing has finished before you close the MP tray.
52
To Next Page
Loading...
Need help?
General
