9. If your LCD error message was [Jam Front/MP Tray] or [Repeat Jam Front/MP Tray], make sure
you look carefully inside the MP tray for jammed paper. Push the release lever (1) toward the back of the
machine, and then slowly pull the jammed paper out of the MP tray.
10. If your LCD error message was [Jam Front/Manual Feed Slot] or [Repeat Jam Front/Manual
Feed], make sure you look carefully inside the manual feed slot for jammed paper and slowly pull it out of
the machine.
11. If your LCD error message was repeat paper jam messages, for example [Repeat Jam Front/Rear],
and you removed the paper support, put it firmly back in the machine. Make sure you fit the paper support
into the channels.
12. Slowly push Tray #1 completely into the machine.
650
To Next Page
Loading...
Need help?
General
