Loading paper
13
2
g Check that the paper is flat in the tray
and below the maximum paper
mark (1). Overfilling the paper tray may
cause paper jams.
h Extend Tray #2 under Tray #1 to keep
the machine stable.
1 Pull Tray #2 out of the machine.
2 In the same way you extended
Tray #1, push the blue slider and
extend Tray #2 to A3 or Ledger
size, so it is even with Tray #1.
3 Lift the A4/LTR stopper (1) if A4 or
Letter size paper is in Tray #2.
4 Slowly push Tray #2 completely
into the machine.
1
To Next Page
Loading...
