Loading paper
23
2
Paper settings 2
Set Paper Size and Type 2
To get the best print quality, set the machine
for the type of paper you are using.
You can use the following sizes of paper for
printing copies: A4, A5, A3, Photo
(10 15 cm), Letter, Legal, Ledger and Folio,
and the following sizes for printing faxes: A4,
A3, Ledger, Letter, Legal and Folio. When
loading a different size of paper in the
machine, you must change the paper size
setting at the same time so your machine can
fit an incoming fax on the page.
a Press (Settings).
b Press Tray Setting.
c Press Tray #1, Tray #2, or
MP Tray.
d Do one of the following:
If you pressed Tray #1 or
MP Tray, press Paper Type.
Press Plain Paper,
Inkjet Paper, Brother BP71 or
Other Glossy.
Press Paper Size.
Swipe up or down or press a or b to
display the option you want to set,
and press it.
• When Brother BP71 or
Other Glossy is selected, Tray #1 is
not available for paper larger than Letter
or A4 size.
• If information about loading the paper in
the MP Tray appears on the Touchscreen,
read it and then press OK to confirm it.
If you selected Tray #2, press
Paper Size.
Swipe up or down or press a or b to
display the paper size options, and
then press the option you want.
Only plain paper is available for Tray #2.
e Press .
The machine ejects paper with the printed
surface face up onto the paper tray at the
front of the machine. When using glossy
paper, remove each sheet at once to
prevent smudging or paper jams.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
