Chapter 3
26
c Adjust the paper guides (1) to fit the
width of your documents.
d Place your documents face up, top
edge first in the ADF until you feel them
touch the feed rollers.
The Touchscreen will display
ADF Ready.
• DO NOT load your document underneath
the supports (1).
• If you load a small size document and
cannot remove it, open the stack tray (1)
and then remove the document.
Close the stack tray before closing the
ADF document support.
Using the scanner glass 3
Use the scanner glass to fax, copy, or scan
single pages or pages of a book.
Document Sizes Supported 3
Length: Up to 297 mm
Width: Up to 215.9 mm
Weight: Up to 2 kg
To Next Page
Loading...
