EasyManua.ls Logo

Brother MFC-J5920DW

Brother MFC-J5920DW
92 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Chapter 10
42
Receive Mode settings 10
Ring Delay 10
Ring Delay sets the number of times the
machine rings before it answers in Fax Only
or Fax/Tel mode. If you have external or
extension telephones on the same line as the
machine, choose the maximum number of
rings.
(See Online User’s Guide.)
a Press (Settings).
b Press All Settings.
c Swipe up or down or press a or b to
display Fax.
d Press Fax.
e Swipe up or down or press a or b to
display Setup Receive.
f Press Setup Receive.
g Swipe up or down or press a or b to
display Ring Delay.
h Press Ring Delay.
i Swipe up or down or press a or b to
display the options, and then press the
number of times the machine will ring
before it answers (2-10 for Australia,
1-10 for New Zealand, 0-2 for Taiwan,
2-8 for South Africa, 0-10 for some
countries).
If you select 0, the machine will answer
immediately and the line will not ring at
all.
j Press .
F/T Ring Time
(Fax/Tel mode only) 10
When your machine receives a call, you and
your caller will hear the normal telephone
ring. The number of rings is set in the ring
delay setting.
If the call is a fax, then your machine will
receive it. However, if it is a voice call then the
machine will sound the F/T Ring (a fast
double-ring) for the time you have set in the
F/T Ring Time setting. If you hear the F/T
Ring, it means that you have a voice caller on
the line.
Because the F/T Ring is made by the
machine, extension and external telephones
will not ring. However, you can still answer the
call on any telephone by using a remote code.
(See Online User’s Guide.)
a Press (Settings).
b Press All Settings.
c Swipe up or down or press a or b to
display Fax.
d Press Fax.
e Swipe up or down or press a or b to
display Setup Receive.
f Press Setup Receive.
g Swipe up or down or press a or b to
display F/T Ring Time.
h Press F/T Ring Time.
i (For New Zealand)
Press 20, 30, 40, or 55 seconds.
(For other countries)
Press 20, 30, 40 or 70 seconds.
j Press .
NOTE
Even if the caller hangs up during the fast
double-ring, the machine will continue to
ring for the set time.

Table of Contents

Related product manuals