Loading paper
15
2
When using A3 or Ledger size paper: 2
a Pull Tray #2 completely out of the
machine. Rest the tray on a flat surface.
b Push the blue slider until it locks in the
release position, and then extend the
tray until the blue slider returns to and
locks in the default position. Make sure
the triangular mark inside the tray (1)
lines up with the mark (2) for
B4 JIS/LGL, as shown in the illustration.
Push the blue slider a second time until
it locks in the release position, and then
extend the tray until the blue slider
returns to and locks in the default
position. Make sure the triangular mark
inside the tray (1) lines up with the
mark (2) for A3/LGR, as shown in the
illustration.
c Gently press and slide the paper
guides (1) to fit the paper size.
Make sure the triangular mark (2) on the
paper guide (1) lines up with the mark
for the paper size you are using.
d Fan the stack of paper well to avoid
paper jams and misfeeds.
Always make sure the paper is not curled.
1
2
2
1
To Next Page
Loading...
Need help?
General
Weight and Dimensions
