General setup
5
1
Setting the Dim Timer for the
backlight 1
You can set how long the LCD backlight stays
on after you go back to the Ready screen.
a Press Menu.
b Press s or t to display
General Setup.
c Press General Setup.
d Press s or t to display
LCD Settings.
e Press LCD Settings.
f Press s or t to display Dim Timer.
g Press Dim Timer.
h Press s or t to display 10Secs,
20Secs, 30Secs or Off, and then
press the option you want.
i Press Stop/Exit.
Mode Timer 1
The machine has four temporary mode keys
on the control panel: FAX, SCAN, COPY and
PHOTO (MFC-J625DW only). You can
change the amount of time the machine takes
after the last Scan, Copy or PhotoCapture
operation before it returns to FAX mode. If
you choose Off, the machine stays in the
mode you used last.
a Press Menu.
b Press s or t to display
General Setup.
c Press General Setup.
d Press s or t to display Mode Timer.
e Press Mode Timer.
f Press s or t to display 0Sec, 30Secs,
1Min, 2Mins, 5Mins or Off, and then
press the option you want.
g Press Stop/Exit.
To Next Page
Loading...
