Making copies
39
7
Enlarging or reducing the
copied image 7
You can choose an enlargement or reduction
ratio. If you choose Fit to Page, your
machine will adjust the size automatically to
the paper size you set.
a Press (COPY).
b Load your document.
c Enter the number of copies you want.
d Press Options.
e Press s or t to display
Enlarge/Reduce.
f Press Enlarge/Reduce.
g Press s or t to display the available
options, and then press the option you
want.
h Do one of the following:
If you chose Enlarge or Reduce,
press the enlargement or reduction
ratio you want.
If you chose Custom(25-400%),
enter an enlargement or reduction
ratio from 25% to 400%.
Press OK.
If you chose 100% or Fit to Page,
go to step i.
i If you do not want to change additional
settings, press Black Start or
Color Start.
• Page Layout is not available with
Enlarge/Reduce.
• Page Layout, Duplex Copy and Sort
are not available with Fit to Page.
• Fit to Page does not work properly
when the document on the scanner glass
is skewed more than 3 degrees. Using the
document guidelines on the left and top,
place your document in the upper left
hand corner, with the document face down
on the scanner glass.
• Fit to Page is not available when
using the ADF.
• Fit to Page is not available for Legal
sized documents.
198% 4"x6" iA4
186% 4"x6" iLTR
104% EXE iLTR
100%
97% LTR iA4
93% A4 iLTR
85% LTR iEXE
83% LGL iA4 (MFC-J625DW)
83% (MFC-J280W)
78% LGL iLTR (MFC-J625DW)
78% (MFC-J280W)
46% LTR i4"x6"
Fit to Pag e
Custom(25-400%)
To Next Page
Loading...
