Brother MFC-J625DW - Beeper Volume; Speaker Volume

Chapter 1
2
Beeper Volume 1
When the beeper is on, the machine will beep
when you press a key, make a mistake, or
after you send or receive a fax.
You can choose a range of beeper volume
levels, from High to Off.
a Press Menu.
b Press s or t to display
General Setup.
c Press General Setup.
d Press s or t to display Volume.
Press Volume.
e Press s or t to display Beeper.
f Press Beeper.
g Press s or t to display Low, Med, High
or Off, and then press the option you
want.
h Press Stop/Exit.
Speaker Volume 1
You can choose a range of speaker volume
levels, from High to Off.
a Press Menu.
b Press s or t to display
General Setup.
c Press General Setup.
d Press s or t to display Volume.
e Press Volume.
f Press s or t to display Speaker.
g Press Speaker.
h Press s or t to display Low, Med, High
or Off, and then press the option you
want.
i Press Stop/Exit.
You can also adjust the speaker volume by
pressing Hook.
a Press Hook on the control panel.
b Press or Stop/Exit.
c Press or on the screen.
Each button press changes the volume
to the next setting.
d Press Hook on the control panel.