Introduction
6
1
Setting up Brother Web Connect 1
(For PICASA WEB ALBUMS™, FLICKR
®
, FACEBOOK, GOOGLE DRIVE™, EVERNOTE
®
, DROPBOX,
SKYDRIVE
®
and BOX)
Step-by-step overview 1
Configure the settings using the following procedure:
The machine can now use the service.
Step 1: Create an account with the desired service (see page 7).
Access the service’s website
using a computer and create
an account. (If you already
have an account, there is no
need to create an additional
account.)
Step 2: Apply for Brother Web Connect access (see page 7).
Start Brother Web Connect
access using a computer and
obtain a temporary ID.
Step 3: Register (on the machine), the account information that is needed to access the desired services (see
page 9
).
Enter the temporary ID to
enable the service on the
machine. Specify the account
name as you would like it to be
displayed on the machine, and
enter a PIN if you would like to
use one.
Web serviceObtain account
User registration
Brother Web Connect
application page
Obtain temporary ID
Enter account information
Web service
Enter temporary ID