• Use a red pen or marker with a tip width of 0.04-0.39 in. (1.0-10.0 mm), that is, from an extra-fine tip up to
an extra-thick marker tip.
• Outlined areas with thick red lines are easier to recognize. However, do not use a pen or marker with a tip
wider than indicated above.
• The red outline must not be broken and the line must not cross more than once.
• The outlined area must have a length and width of at least 0.4 in. (1 cm).
• If the paper has a dark background color, the outlined area may be difficult to recognize.
Related Information
• Outline, Scan, and Copy or Cut
• Outline and Scan a Document to the Cloud
• Outline and Scan a Document to a Memory Card or USB Flash Drive
• Copy an Outlined Section
• Cut an Outlined Section
39
To Next Page
Loading...
