Brother MFC-T800W - Unscannable Area

Chapter 7
26
f If you do not want to change additional
settings, press
Inicio Negro (Black Start) or
Inicio Color (Color Start) to scan the
page.
If you placed the document in the ADF
1
or are making a poster, the machine
scans the pages and starts printing.
1
DCP-T700W and MFC-T800W only
If you are using the scanner glass, go
to step g.
g (MFC-T800W)
After the machine has scanned the
page, press 1 to scan the next page.
(DCP-T300, DCP-T500W and
DCP-T700W)
After the machine has scanned the
page, press a to scan the next page.
h Place the next page on the scanner
glass. Press OK to scan the page.
Repeat steps g and h for each page of
the layout.
i (MFC-T800W)
After all the pages have been scanned,
press 2 to finish.
(DCP-T300, DCP-T500W and
DCP-T700W)
After all the pages have been scanned,
press b to finish.
NOTE
• Make sure the paper size is set to
Letter, A4 or Executive.
• Poster copy is not available for Executive
size paper.
• You can only make one color copy at a
time.
• You can only make one Poster copy at a
time.
• (P) means Portrait and (L) means
Landscape.
Place the document face down in the
direction shown below:
 2in1(P)
 2in1(L)
 4in1(P)
 4in1(L)
 Poster(3x3)
NOTE
The poster copies have overlapping
portions so that you can easily paste them
together.