Why is my Brother P-Touch 18R display blank?
Several factors can cause a blank display on your Brother Label Maker: * Ensure the AC adapter designed for your P-touch is correctly connected. * Verify you're using the correct AC adapter (included in the package). * Remove and re-fit the rechargeable battery. * The battery charge may be low, even when not in use. Charge the battery.
What to do if my Brother P-Touch 18R Label Maker is not charging?
If your Brother Label Maker isn't charging, check these: * Ensure the AC adapter is correctly connected to the battery charger. * Inspect the charging terminals; if dirty, turn off the P-touch and gently clean them with a dry cloth or cotton swab.
How to unlock a Brother Label Maker?
If your Brother Label Maker screen 'locks' or becomes unresponsive, reset the internal memory to the initial settings. If this doesn't solve the problem, disconnect the AC adapter and remove the rechargeable battery for more than 5 minutes.
Provides directions for safe use and handling to prevent injury and product damage.
Outlines general safety guidelines and usage recommendations for the P-touch device.
Covers the rechargeable battery and AC adapter for powering the P-touch.
Guides on typing and modifying text using the P-touch keyboard.
A guide to common problems and their solutions.
Explains error messages displayed on the P-touch and how to resolve them.
General| Model | P-Touch 18R |
|---|---|
| Print Technology | Thermal Transfer |
| Print Resolution | 180 dpi |
| Label Width | 3.5 mm, 6 mm, 9 mm, 12 mm |
| Series | P-Touch |
| Tape Size | Up to 12 mm |
| Power Source | 6 x AA Batteries (Not Included) or AC Adapter (AD-30) |
| Keyboard | Yes |
To Next Page