1
2
3
4
5
6
7
8
9
49
z LABEL PRINTING
Tape Cutting Options
Press the key.
The message shown on the right is displayed while
the label is being printed.
The tape cutting options allow you to specify how the tape is fed and cut when printing
labels. In particular, the “Chain” and “No Cut” options greatly reduce the amount of
wasted tape by using smaller margins and eliminating blank sections cut between
labels.
Press the key to display the Tools menu, and then
select “Cut Option” using the or keys.
Press the key to display the Cut Option menu,
and then select an option using the or keys.
Press the key to apply the settings.
4
• Press the key to return to the previous step.
• Text should be printed on clear tape when using the mirror printing function.
• The copy and auto-numbering functions cannot be used together with the mirror printing
function.
Tape Cutting Options
1
2
New settings are NOT applied if you do not press the
key.
3
• Press the key to return to the previous step.
• Refer to the Tape Cutting table for a list of all available settings.
To Next Page
Loading...
Need help?
General
