EDITING A LABEL
26
Entering Accented Characters
The P-touch can display and print a set of accented characters such as composite
characters that consist of a letter and a diacritical mark (eg. ) and other language
specific characters.
There are three methods of entering accented characters:
• Using the key.
• Using the composite character keys.
• Using the Accent function.
Entering Accented Characters Using Key
Accented characters printed in blue above the keys on the keyboard can be entered
using the key.
• To enter one of these accented characters, hold down the key and then press the
desired key.
Entering Accented Characters Using Composite Character Keys
Composite characters consist of a letter and a diacritical mark. The diacritical marks
available are ^, ¨, ´, `, and
~
.
Hold down the key and then press the key for the
desired diacritical mark.
The diacritical mark is displayed.
Type in the desired letter.
The composite character is entered in the line of text.
zComposite Character Listz
Entering Accented Characters
1
2
Refer to the Composite Character List table for a complete list of diacritical marks and
composite characters available.
Diacritical Mark Composite Characters
^
¨
´
`
~
To Next Page
Loading...
Need help?
General
