EDITING A LABEL
38
Using Auto-Format Layouts
Using Block Layouts
Press the key to display the Auto-Format screen,
and then select “Block Layouts” using the or
keys.
Press the key to display the Tape Width screen,
and then select a tape width using the or keys.
Press the key.
When the tape width has not changed, the last block
layout selected is displayed. When the tape width has
changed, the default layout for the new tape width is
displayed.
Select a block layout using the or keys.
Press the key.
The Style screen is displayed.
Select an attribute using the or keys, and then
set a value for that attribute using the or keys.
Press the key.
The block layout text entry screen is displayed.
Enter text and then press the key.
Repeat for each text field.
After all text fields are completed, press the key
to display the print menu.
1
2
3
4
5
Press the key to set the selected attribute to
the default value.
6
Caps mode can be used when entering text.
7
8
To Next Page
Loading...
Need help?
General
