Brother P-Touch 9600 - Page 68

58
ERROR MESSAGE LIST
SET 9mm! ● This message appears if a 9-
mm-wide tape cassette is not
installed when printing an Auto
format template created for 9-
mm-wide tape.
● Install a 9-mm-wide tape
cassette.
SET 12mm! ● This message appears if a 12-
mm-wide tape cassette is not
installed when printing an Auto
format template created for 12-
mm-wide tape.
● Install a 12-mm-wide tape
cassette.
SET 18mm! ● This message appears if a 18-
mm-wide tape cassette is not
installed when printing an Auto
format template created for 18-
mm-wide tape.
● Install a 18-mm-wide tape
cassette.
SET 24mm! ● This message appears if a 24-
mm-wide tape cassette is not
installed when printing an Auto
format template created for 24-
mm-wide tape.
● Install a 24-mm-wide tape
cassette.
SET 36mm! ● This message appears if a 36-
mm-wide tape cassette is not
installed when printing an Auto
format template created for 36-
mm-wide tape.
● Install a 36-mm-wide tape
cassette.
SET STAMP-L! ● This message appears if an 24-
mm-wide stamp tape cassette is
not installed when printing an
Auto format template created
for a STAMP L stamp.
● Install an 24-mm-wide
stamp tape cassette.
SET STAMP-M! ● This message appears if an 18-
mm-wide stamp tape cassette is
not installed when printing an
Auto format template created
for a STAMP M stamp.
● Install an 18-mm-wide
stamp tape cassette.
TAPE EMPTY! ● This message appears if no tape
cassette is installed when you
try to feed the tape, print or use
the Layout preview function.
● Install a tape cassette and
try again.
TAPE END! ● This message appears if the end
of the tape in the cassette has
been reached.
● Replace the tape cassette.
ERROR MESSAGE CAUSE SOLUTION