44
*1 This is the default setting.
*2 These are used when specifying the number of copies printed and when selecting a template
number.
Scan bar codes to specify a three-digit number, such as [00][7] or [0][1][5]. The setting is
automatically applied when three digits have been specified.
To change settings, scan the “Number of copies” bar code again when changing the number of
copies or scan the “Select template” bar code again when changing the template number, and
then scan the bar codes for the new three-digit number.
• Preset template 5 • Preset template 6
• Preset template 7 • Preset template 8
• Preset template 9 • Preset template 10
■ Select template
■ Delimiter
■ Begin printing
To Next Page
Loading...
