40
Product specifications
■ Printer specifications
* Auto “crack and peel” cutter is available only when using laminated tape.
■ Operating environment
Item Specification
Display
Power lamp (green), STATUS lamp (red),
USB Direct Interface lamp (green/red) (PT-9800PCN only)
Printing
Printing method Heat transfer laminated printing/thermal printing
Print head 360 dpi/384 dot
Print resolution
For TZ tape cassettes: 360 × 360 dpi
For HG tape cassettes: 360 × 180 dpi, 360 × 360 dpi or
360 × 720 dpi
Printing speed
For TZ tape cassettes: Up to 20 mm/sec
For HG tape cassettes: Up to 80 mm/sec
Maximum printing width 27.1 mm
Buttons Power button, Feed/Cut button
Interface
Serial (RS-232C), USB2.0 full speed LAN (10/100BASE-TX), USB Direct Interface (PT-9800PCN only)
Power source AC 220 to 240 V, 50 Hz (AC adapter)
Power consumption
Approx. 30 W (during printing)
Measurements 116 × 193 × 140 mm (W × D × H)
Weight Approx. 1.58 kg
Cutter Auto full cutter/auto “crack and peel” cutter
Item Specification
OS Windows
®
Windows
®
XP/Windows Vista
®
/Windows
®
7,
Windows Server
®
2003/Windows Server
®
2008/
2008 R2 (for PT-9800PCN only) (Pre-installed device)
Standard Interface Windows
®
RS-232C, USB port (USB Spec. 1.1 or 2.0 protocol),
(only for PT-9800PCN) 10/100BASE-TX Wired Ethernet
Hard Disk Windows
®
Disk space more than 70 MB
Memory Windows
®
Windows
®
XP: More than 128 MB
Windows Server
®
2003: More than 256 MB
Windows Vista
®
/Windows Server
®
2008/2008 R2:
More than 512 MB
Windows
®
7: More than 1 GB (32-bit) or 2GB (64-bit)
Monitor Windows
®
SVGA, high colour or higher graphics card
Others CD-ROM drive
To Next Page
Loading...
