33
Using P-touch Editor Lite LAN
(PT-9800PCN and Windows
®
only)
P-touch Editor Lite LAN is a basic version of
a label-editing tool.
By copying P-touch Editor Lite LAN, installed
from the enclosed CD-ROM, into a shared
folder on the server, P-touch Editor Lite LAN
on the server can be accessed by other
network users to create labels, and print
from PT-9800PCN connected to the network
without installing any PT-9800PCN driver on
the computer of each user.
■ How to install P-touch Editor Lite LAN
1
Start the computer and put the
CD-ROM into the CD-ROM drive.
2
Click [Custom Installation].
3
Click [P-touch Editor Lite LAN].
4
Follow the on-screen instructions.
■ How to share P-touch Editor Lite LAN
• Copy the folder containing P-touch Editor
Lite LAN from the shared folder on the
network to your computer.
• Start up P-touch Editor Lite LAN from the
shared folder on the network.
■ How to use P-touch Editor Lite LAN
1
Start P-touch Editor Lite LAN.
2
Enter the label text in P-touch Editor
Lite LAN.
For example, click on the layout area
and then type “Brother”.
3
Click on the “Print” button.
4
The label is printed.
Note
● In order for P-touch Editor Lite LAN to be
used, the IP address of this printer must
be correctly specified.
The IP address can be specified with
a utility such as BRAdmin Light, which
can be installed from [Utility Installation]
on the CD-ROM.
For details on using this utility, refer to
“Setting the IP address and subnet mask”
in the “Network User’s Guide” (PDF).
● On a network where the IP address is
automatically assigned, for example, with
DHCP, the IP address is automatically
assigned when the printer is connected
to the network, therefore the printer can
be used immediately. However, since the
IP address may change dynamically,
we recommend specifying a static
IP address when P-touch Editor Lite LAN
is being used. For details, contact your
network administrator.
● Specify the settings after consulting with
your network administrator.
Note
● If it does not start up automatically, open
the files on the CD-ROM and double-click
on “Setup.exe”.
Note
● A label created using P-touch Editor
Lite LAN can only be printed from the
PT-9800PCN connected to the network.
Brother
To Next Page
Loading...
