32
6
Scan the “Select template” bar code,
and then scan the bar codes under
“For entering numbers” to specify the
“Key Assign” number (three digits)
for the bar code template.
7
Scan the key bar code whose data is
to be used in the database file.
8
Scan the “Delimiter” bar code.
9
Scan the “Begin printing” bar code.
0
The object data in the specified
template is replaced with the database
data, and the labels are printed.
Note
● It is possible to scan multiple settings.
● If no settings have been specified, a label
will be printed with the default P-touch
Template Setting (Single copy with “Auto
cut on” and “Half cut on”). For details on
P-touch Template Settings, download
“P-touch Template manual” (English only)
from the following web site:
http://solutions.brother.com/
Choose your region (eg. Europe), your
country, your model and Downloads for
your model.
● To specify the number of copies to be
printed, scan the “Number of copies”
bar code, and then scan the bar codes
under “For entering numbers” to specify
a three-digit number. The setting is
automatically applied when three digits
have been specified.
Example:
Specify numbers by scanning bar codes
as follows: 7 → [00][7], 15 → [0][1][5].
● To change the setting for the number of
copies, scan the “Number of copies” bar
code again, and then scan the bar codes
for the new three-digit number.
Note
● The setting is automatically applied
when three digits have been specified.
Example:
Specify numbers by scanning bar codes
as follows: 7 → [00][7], 15 → [0][1][5].
● To change the number, scan the “Select
template” bar code again, and then scan
the bar codes for the new three-digit
number.
ABC Company
Walter Freeman
Planning
876 6
To Next Page
Loading...
Need help?
General
Weight and Dimensions
