Press the Power Button to power on. Hold the Power Button for 0.5 seconds to power off.
The label printer's LED indicates the label printer's status.
4. Turn the Label Printer On or Off
5. LED Indications
LED Condition
Not lit Power Off
Steady green light
Flashing green light
(Lit for 3 seconds, then off for 1
second)
Standby
Flashing green light
(0.5 second intervals)
Receiving data from your mobile device.
Flashing orange light
(1 second intervals)
Insufficient charge or battery failure.
LED Condition
How to Clear
an Error
Solution
Steady red light Booting
Transfer the program again.
If the problem is still not resolved, contact
Brother Customer Service.
Flashing red light
(1 second
intervals)
installed.
installed.
Lightly press the
Power Button.
Insert the correct
Tape Cassette.
The machine failed to
communicate with your
mobile device.
Restart the label
printer.
Connect via
Bluetooth and try
sending the label
from your mobile
device to the
machine again.
Cutter error Lightly press the Power Button.
Incompatible AC Adapter used Use the correct AC Adapter.
Flashing red light
(0.5 second
intervals)
System error
Please contact Brother Customer
Service.
To Next Page
Loading...
Need help?
General
