Brother P-Touch D600 - Using Table Format

EDITING A LABEL
32
Using Auto-Format Layouts
 Using Table Format
You can set the number of rows and columns for a label to easily create
a template.
NOTE
• There is a maximum number of rows of text that can be entered for
each tape width. A maximum of 7 rows for 24 mm tape, 5 rows for
18 mm tape, 3 rows for 12 mm tape, 2 rows for 9 mm and 6 mm tape.
• 3.5 mm tape cannot be used for table format.
• On the print menu screen:
x Select [Edit] to change the text data or the
barcode setup.
x Select [Save] to store the label to the file
memory.
For the file memory, refer to “USING THE FILE MEMORY” on
page 46.
x Select [Menu] to change the font, align or frame settings.
x Select [Preview] to preview the label before printing. Press
( ) to change the magnification of the LCD screen.
x Select [Print Options] to set the print settings. For details, refer to
“Numbering Printing” on page 42 or “Mirror Printing” on page 42.
9mm
2LineA
2LineB
1+2Line
6mm 1+2Line
Attribute Value Details
() Î / [Auto Format] Î () or ( ) Î / [Table Format] Î
() or ( )
Î / Select a tape width Î ( ) or ( ) Î /
[Rows]
Î / Set a value Î / [Columns] Î / Set a value Î ()
or ( )
Î Enter text Î () or ( ) Î Repeat for each text field Î
() or ( )
Î / [Print] Î ( ) or ( ) Î / Select the
number of labels to be printed
Î ( ), ( ) or ( ).