EasyManua.ls Logo

Brother P-Touch D600 - User Manual

Brother P-Touch D600
58 pages
Save Page as PDF
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
Read this User’s Guide before you start using your P-touch.
Keep this User’s Guide in a handy place for future reference.
Please visit us at http://support.brother.com/ where you can get product support and
answers to frequently asked questions (FAQs).
www.brother.com

Table of Contents

Questions and Answers

  • D
    David MorrisAug 17, 2025
    What to do if Brother P-Touch D600 does not print after pressing the Print key?
    • C
      Cassandra WallsAug 17, 2025
      First, ensure that some text has been entered. Then, check that the tape cassette is correctly installed and has sufficient tape. If the tape is creased, cut off the damaged section and thread it through the tape exit slot. If the tape is jammed, remove the cassette, pull out the jammed tape, cut it, and make sure the end of the tape passes through the tape guide before reinstalling the cassette.
  • W
    woodsaprilAug 19, 2025
    How to fix Brother P-Touch D600 Label Maker when the label does not print correctly?
    • Q
      qmercadoAug 19, 2025
      Remove the tape cassette and reinstall it, pressing firmly until it clicks into place. If the print head is dirty, clean it using a cotton swab or an optional print head cleaning cassette (TZe-CL4).
  • M
    Mr. David ThorntonAug 22, 2025
    What to do if my Brother P-touch Label Maker stops while printing?
    • H
      Heather OrtegaAug 22, 2025
      If you see striped tape, replace the tape cassette, as this indicates the tape has run out. Otherwise, replace all the batteries or connect the AC adapter directly.
  • S
    Stephen RodriguezAug 25, 2025
    Why is my Brother P-Touch D600 not cutting labels automatically?
    • B
      Brendan BakerAug 26, 2025
      Check that the Cut Option setting is not set to Chain or No Cut, because in this case the tape will not be fed after printing the label. You can also press the feed and cut buttons ( ) and ( ) to manually feed and cut the tape.
  • K
    Kathryn CherryAug 27, 2025
    What to do if my Brother Label Maker does not print after pressing the Print key?
    • M
      Monica ClarkAug 27, 2025
      If your Brother Label Maker isn't printing after you press the Print key, make sure you've entered text and that the tape cassette is correctly installed with enough tape. If the tape is creased, cut off the damaged part and thread the tape through the exit slot. For jammed tape, remove the cassette, pull out the jammed portion, and cut it. Ensure the tape's end goes through the guide before reinstalling the cassette.
  • A
    Anna MedinaAug 30, 2025
    How to fix a Brother Label Maker that does not print correctly?
    • T
      timmercerAug 30, 2025
      If your Brother Label Maker isn't printing labels correctly, try removing the tape cassette and reinstalling it, pressing firmly until it clicks. If the print head is dirty, clean it using a cotton swab or an optional print head cleaning cassette (TZe-CL4).
  • T
    Tonya StevensonSep 2, 2025
    Why is my Brother Label Maker not cutting automatically?
    • J
      James BlevinsSep 2, 2025
      If your Brother Label Maker isn't cutting labels automatically, check that the Cut Option setting isn't set to Chain or No Cut, because in these modes the tape won't feed after printing. Alternatively, you can press the feed and cut buttons to manually feed and cut the tape.
  • C
    Cassidy BenderSep 5, 2025
    Why does the Brother P-Touch D600 display remain blank after turning it on?
    • K
      kaitlyn04Sep 5, 2025
      Make sure the batteries are correctly installed and the AC adapter (designed specifically for your P-touch) is correctly connected. Also, check that the rechargeable battery is fully charged.
  • A
    Austin RiosSep 7, 2025
    What to do if the ink ribbon is separated from the ink roller in Brother P-Touch D600 Label Maker?
    • J
      Joshua ClarkSep 7, 2025
      If the ink ribbon is broken, replace the tape cassette. If the ribbon is not broken, leave the tape uncut and remove the tape Spool cassette, then wind the loose ink ribbon onto the spool.
  • L
    Laura PrinceSep 10, 2025
    Why is the display blank on my Brother Label Maker after turning it on?
    • D
      Dylan ShermanSep 12, 2025
      If the display of your Brother Label Maker remains blank after you turn it on, verify that the batteries are correctly installed and that the AC adapter (specifically designed for your device) is properly connected. Also, ensure that the rechargeable battery is fully charged.

Summary

Safety Precautions

Safety Warnings and Cautions

Essential safety guidelines and warnings to prevent injury and damage.

Getting Started

Editing a Label

Entering and Editing Text

How to input, modify, add lines, and delete text for labels.

Setting Character Attributes

Adjusting font, size, width, style, line, and alignment for label text.

Setting Label Attributes

Using Auto-Format Layouts

Using pre-designed templates like Asset Tags, Cabinets, and Signage.

Creating Barcode Labels

Steps to create barcode labels with various protocols and settings.

Using Time and Date Function

Label Printing

Printing Labels and Copy Settings

General instructions for printing labels, including single/multiple copies.

Setting Tape Cutting Options

Using File Memory

Saving Label Files

How to save created labels to the P-touch's internal memory for later use.

Managing Saved Labels

Resetting and Maintaining Your P-touch

Resetting the P-touch

How to reset the P-touch memory to factory settings or clear specific data.

Troubleshooting

Common Problems and Solutions

Solutions for common problems like the device not responding or display issues.

Error Message Troubleshooting

Troubleshooting steps for specific error messages encountered during operation.

Brother P-Touch D600 Specifications

General IconGeneral
Device CategoryLabel Maker
Print MethodThermal Transfer
Print Resolution180 dpi
Print Speed30mm/sec
Maximum Tape Width24mm
Tape Sizes3.5mm, 6mm, 9mm, 12mm, 18mm, 24mm
Keyboard TypeQWERTY
ConnectivityUSB
CutterAutomatic
Memory99 Labels
ModelBrother P-Touch D600
Tape TypeTZe
DisplayLCD
Power SourceAC Adapter or 6 x AA Batteries
StylesNormal, Bold, Outline, Shadow
Dimensions201mm x 192mm x 86mm
FontsMultiple fonts included
SymbolsMultiple symbols included
Weight960g (without tape and batteries)

Related product manuals