Brother P-Touch D600 - Setting Tape Cutting Options

39
Using Time & Date Function
EDITING A LABEL
NOTE
When [Auto] is selected for the Timing setting and a clock icon is added
to the text by pressing ( ), selecting [Time Stamp] by using or
and then pressing ( ) or ( ), you can confirm what settings
applied for the icon by positioning the cursor to the left of the clock icon,
and then pressing ( ), selecting [Time Stamp] by using or and
then pressing ( ) or ( ).
[Format]
You can select which information to use when adding date and time to
your label.
Time Stamp: Format Options
[Forward]
You can select whether to use a future date and time, a past date and
time or the current date and time when using the Time & Date function.
NOTE
You can also set the date and time by typing in the desired numbers.
() Î / [Settings] Î () or ( ) Î / [Time Stamp Setting] Î
() or ( )
Î / [Format] Î / Select the value for the setting Î
( ) or ( ) to apply the settings.
Attribute Value Description
Format
Date Date only will be printed on the label.
Date & Time The date and time will be printed on the label.
Time Time only will be printed on the label.
Time & Date The time and date will be printed on the label.
() Î / [Settings] Î () or ( ) Î / [Time Stamp Setting] Î
() or ( )
Î / [Forward] Î / [On] to specify the amount of date
and time to increase or decrease
Î ( ) or ( ) Î / [Add/Reduce] Î
/ Choose the year, month, week, date, hour or minute
Î / Set the
amount to increase or decrease from the currently set clock
Î After all
parameters are set, ( ) or ( ) to apply the settings.