EasyManuals Logo

Brother P-touch PT-9600 User Manual

Brother P-touch PT-9600
212 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #21 background imageLoading...
Page #21 background image
9
Ch. 2 Getting Started
Getting Started
To connect a computer to the P-touch
through the USB port:
1 Insert the flat (A) connector on the USB
cable into the USB port on the computer.
2 Insert the square (B) connector on the USB
cable into the USB port on the right side of
the P-touch.
3 Turn on the P-touch.
After the P-touch is connected to a computer
using a USB cable, the P-touch enters Interface
mode when data is sent to it from the computer.
Installing the Software &
Printer Driver
In order to provide even more illustration and
layout features to the label-making possibilities
available with your P-touch, three applications
are available on the enclosed
CD-ROM: P-touch Editor 3.2, P-touch Quick
Editor and P-touch AV Editor (for Windows
®
only). With all three applications, the printer
driver must also be installed in order to print
labels from the P-touch.
On a Computer Running
Windows
®
Before installation
Check that your system configuration meets the
following requirements.
Computer: IBM PC or compatible.
Operating system: Pre-installed with Microsoft
®
Windows
®
98, 98 SE, Me, 2000 Professional or
XP
Hard disk free space: At least 20 MB (100 MB
for a full installation)
Memory: At least 64 MB
Monitor: VGA or higher graphics card
USB port
CD-ROM drive
NOTE
To exit Interface mode for a USB connection
and return to the text, press any key.
The P-touch cannot enter Interface mode for a
USB connection while it is printing, feeding
tape or in Interface mode for an RS-232C con-
nection (PT-9600 only) or while a macro is
being assigned to a PF key (PT-9600 only).
P-touch 9600:
P-touch 3600:
Length Margin Font Width Size
1
2
3
4
5
6
7
8
9
A
B
C
D
E
F
K
Q
Q
Q
Q
Q
Q
Q
Q
Q
Q
Q
Q
Q
Q
Q
Q
Q
Q
Q
Q
Q
Q
Q
Q
R
R
R
R
R
R
G
H
I
J
AUTO 1.00 HELSINKI A AUTO
INTERFACE
NOTE
For installation on Windows
®
2000, administra-
tor privileges are required. In addition, printing
requires power user or administrator privileges.
This software cannot be operated in Users
groups. In addition, this software is not compat-
ible with the Windows
®
2000 Server operating
system.
With Windows
®
XP, printing and installation is
only possible from an account with administra-
tor privileges. These operations cannot be per-
formed from an account with limited privileges.
NOTE
Up to 100 MB of hard disk free space may be
needed when printing long labels or large amounts
of data.

Table of Contents

Other manuals for Brother P-touch PT-9600

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Brother P-touch PT-9600 and is the answer not in the manual?

Brother P-touch PT-9600 Specifications

General IconGeneral
BrandBrother
ModelP-touch PT-9600
CategoryLabel Maker
LanguageEnglish

Related product manuals