Brother P-touch PT-E110 User Manual

GETTING STARTED
Installing Power Supply and Tape Cassette
With the LCD facing down, open the Cassette
Cover by pressing the grooved tab and
pushing the cover in the direction of the
arrow, as illustrated.
When replacing batteries or tape cassettes,
make sure the power is turned off.
This P-touch labeling system requires six
AAA alkaline batteries or six fully-charged
Ni-MH batteries, not included.
1
Print Head
Tape Cutter Leve
r
Cassette Cover
1
2
ELECTRONIC LABELING SYSTEM
Thank you for purchasing a Brother P-touch labeling system!
Use your new Brother P-touch labeling system to create a wide variety of custom, self-adhesive labels.
This P-touch labeling system uses Brother TZe or HGe tapes. TZe and HGe tape cassettes are available in many colours and
sizes. For a complete list of tapes compatible with your P-touch labeling system, visit us at www.brother.com
Please read this guide, and the included Product Safety Guide, before using this P-touch labeling system. After reading this guide,
keep it in a safe place.
Printed in China
D00NH8001
English
User’s Guide
PT-E110
www.GlobalTestSupply.com
Find Quality Products Online at: sales@GlobalTestSupply.com

Brother P-touch PT-E110 Specifications

General

Model	PT-E110
Category	Label Maker
Print Resolution	180 dpi
Maximum Tape Width	12 mm
Keyboard Type	QWERTY
Display	LCD
Cutter Type	Manual
Print Speed	20 mm/sec
Tape Sizes	3.5mm, 6mm, 9mm, 12mm
Number of Fonts	1
Built-in Symbols	200
Multi-Block Printing	No
Memory	No
Print Method	Thermal Transfer
Tape Type	TZe tape
Font Styles	Normal, Outline, Shadow
Max. Label Length	300 mm
Weight	400 g (without batteries)
Power Source	6 x AAA batteries (LR03/HR03) (not included)