To Next PageTo Next Page
What to do if Brother QL-1060N layout doesn't update with new label roll?
If the layout style is not updated when a new label roll is installed and the Add-in is still activated on your Brother Label Maker, exit the P-touch Add-In. Load the second label roll type, reactivate the P-touch Add-in, choose "Select Layout", and then verify the layout.
General| Print technology | Direct thermal |
|---|---|
| Vertical printing | Yes |
| Maximum resolution | 300 x 300 DPI |
| Maximum print height | 3000 mm |
| Maximum printing width | 98.6 mm |
| Wi-Fi | No |
| Standard interfaces | USB 2.0, RS-232 |
| USB 2.0 ports quantity | 1 |
| Tape type | DK |
| Tape cutting | - |
| Internal memory | 2 MB |
| Number of fonts | 7 |
| Number of styles | 6 |
| Built-in barcodes | CODABAR (NW-7), Code 128 (A/B/C), Code 39, Code-128 Codabar Library, Code-39 Library, EAN128, EAN13, EAN8, Interleaved 2/5, ITF, PDF417 |
| Compatible operating systems | Windows 2000/XP/Vista/7/8 (32 & 64 bits version)\\r Windows Server 2003/2008 (R2)/2012\\r Mac OS 10.3.9 - 10.8 |
| Tape size | 62 mm |
| Dimensions (WxDxH) | 170 x 220 x 148 mm |
| Bundled software | P-touch Editor, P-touch Address Book |
| Maximum label width | 102 mm |
| Maximum label length | 3 m |
| Product color | Grey, Metallic |
Weight and Dimensions| Weight | 1700 g |
|---|
Provides a general introduction to the Brother printer's network capabilities and setup.
Details the basic network functions offered by the Brother QL-580N/1060N printer.
Explains the BRAdmin Light, BRAdmin Professional, and Web BRAdmin utilities for device management.
Describes Peer-to-Peer and Network Shared environments for printer connectivity.
Lists and explains the TCP/IP protocols supported by the Brother print server.
Outlines the steps for configuring TCP/IP settings for network printing.
Explains the concepts of IP addresses, subnet masks, and gateways for network setup.
Guides on how to set IP address and subnet mask using BRAdmin Light utility.
Step-by-step instructions for configuring the printer using BRAdmin Light.
Instructions for modifying print server settings via BRAdmin Light and web browser.
Introduction to setting up Windows printers for TCP/IP Peer-to-Peer network printing.
Steps to configure a standard TCP/IP port for Windows Vista® printers.
Instructions for installing printer drivers when the driver is not pre-installed.
Procedure to configure network printing when the driver is already installed.
Explains how to print from Macintosh® using Simple Network Configuration.
Details on leveraging Mac OS X's network configuration features.
Guides Mac users on selecting the appropriate printer driver.
Introduces the Driver Deployment Wizard for automating printer driver installations.
Introduces common network problems and their solutions for Brother printers.
Addresses common issues like CD-ROM not starting or printer not found.
Troubleshooting steps for issues during network print software installation.
Solutions for common printing issues like jobs not printing or errors during printing.
Details advanced methods for IP address configuration beyond basic setup.
Explains how to configure IP addresses using a DHCP server.
Instructions for configuring IP addresses using the BOOTP protocol.
Guide on setting IP addresses via the Reverse ARP (RARP) protocol.
Explains Automatic Private IP Addressing (APIPA) for IP address assignment.
Lists the network node type and protocol support for wired Ethernet.
Specifies the minimum hardware and OS requirements for network connectivity.
Details compatibility of management utilities with different operating systems.
Provides licensing information for OpenSSL used in the product.
