What to do if I am unable to reset error on Brother Label Maker?
If you are unable to reset an error on your Brother Label Maker, try opening and then closing the DK Roll Compartment Cover. If that doesn't work, press the Cutter button. As a last resort, turn the printer off, and then turn it on again. If the issue still persists, contact Brother customer service.
How to improve print quality on Brother Label Maker?
If the print quality of your Brother Label Maker is poor, clean the roller.
What to do if the label is not ejected correctly from my Brother QL-1100 Label Maker after printing?
If the label is not ejected correctly after printing, check that the Label Output Slot is not blocked. Also, check that the DK Roll is set correctly by removing and reinstalling it. Ensure that the DK Roll Compartment Cover is closed correctly.
What to do if I get a cutter error on my Brother Label Maker?
If you encounter a cutter error, keep the DK Roll Compartment Cover closed and press the Power button. The cutter will return to its normal position, and the printer will turn off automatically. Once off, inspect the Label Output Slot for any jammed labels and remove them.
What to do if I can't reset an error on my Brother QL-1100 Label Maker?
Try opening and then closing the DK Roll Compartment Cover. If the error persists, press the Cutter Button. If the error still isn't resolved, turn the Label Printer off and then on again. If the error continues, contact Brother Customer Service.
What to do if my Brother QL-1100 Label Maker is not ejecting labels correctly?
Check if the Label Output Slot is blocked. Also, try removing and reinstalling the DK Roll to ensure it is set correctly. Make sure that the DK Roll Compartment Cover is closed correctly.
How to reset Brother QL-1100 Label Maker?
You can reset your Brother Label Maker using the Printer Setting Tool from a computer or by using the Printer buttons.
What to do if my Brother Label Maker shows a cutter error?
If a cutter error occurs on your Brother Label Maker, keep the DK Roll Compartment Cover closed and press the Power button.
What to do if Brother QL-1100 label is not ejected correctly?
If the label is not ejecting correctly from your Brother Label Maker after printing, first check that the Label Output Slot is not blocked. Then, verify that the DK Roll is set correctly by removing it and reinstalling it. Also, ensure that the DK Roll Compartment Cover is properly closed.
What to do if my Brother QL-1100 Label Maker is not printing?
If your Brother Label Maker is not printing, first ensure the cable is securely connected. If the issue persists, remove and reinstall the DK Roll, verify there is enough roll remaining, and confirm the DK Roll Compartment Cover is closed. As a next step, turn the printer off and then on again. You may also want to try connecting it directly to the computer or using a different USB port.
General| Color | No |
|---|---|
| Print technology | Direct thermal |
| Rotated printing | Yes |
| Maximum resolution | 300 x 300 DPI |
| Minimum print length | 25.4 mm |
| Maximum printing width | 101.6 mm |
| Package depth | 294 mm |
| Package width | 240 mm |
| Package height | 243 mm |
| Package weight | 2900 g |
| Ethernet LAN | - |
| USB 2.0 ports quantity | 2 |
| Connectivity technology | Wired |
| Product color | Black, White |
| Maximum label width | 103.6 mm |
| Maximum label length | 3 m |
| Tape type | DK |
| Flash memory | 7 MB |
| Internal memory | 7.8 MB |
| Number of fonts | 1 |
| Built-in barcodes | Code 128 (A/B/C), Code 39, Code 93, Data Matrix, EAN128, EAN13, GS1 DataBar, GS1 DataBar Expanded, GS1 DataBar Limited, ISBN-2, ISBN-5, PDF417, QR Code, UPC-A, UPC-E |
| AC input voltage | 120 V |
| AC input frequency | 60 Hz |
| Windows operating systems supported | Windows 10 Education, Windows 7, Windows 8, Windows Vista |
| Harmonized System (HS) code | 84433210 |
| Cables included | AC, USB |
| Label memory | 99 label(s) |
| Sustainability certificates | ENERGY STAR |
Weight and Dimensions| Depth | 220 mm |
|---|---|
| Width | 170 mm |
| Height | 149 mm |
| Weight | 1655 g |
Guides on setting up the label printer, including parts description, connections, and power.
Instructions for installing software and printing labels from a computer using P-touch Editor.
Details on configuring printer settings, device settings, and template settings using the Printer Setting Tool.
Guide to using P-touch Editor for creating label layouts, including Express and Professional modes.
Instructions to reset the printer to factory settings using buttons or the Printer Setting Tool.
Covers common problems, LED indications, and solutions for printing errors and connectivity.
To Next Page
